SHENZHEN YITUOWULIAN SYSTEM CO.,LTD
SHENZHEN YITUOWULIAN SYSTEM CO.,LTD
Add to Cart
Positioning And Tracking Motorcycle GPS Tracker Support Mileage Statistics
Main Functions:
| NO. | Function |
| 1 | Real time Tracking |
| 2 | Ignition Detection |
| 3 | Shut Off Engine |
| 4 | History Track |
| 5 | Mileage Statistics |
| 6 | Track Point Report |
| 7 | Power Off Alert |
Feature Description:
| NO. | Feature | Descrption |
| 1 | GPS Positioning | Via GPS positioning,User can track the vehicle location,speed and routes through phone or computer. |
| 2 | Playback Routes | Can check the vehicle’s routes and speed in recent 2 months. |
| 3 | Setting Function Via SMS | Setting function of device via SMS and check location via SMS. |
| 4 | Ignition Detection | Get vehicle status via ACC ignition detection |
| 5 | Vibration Alarm | After setting,Device will send message and call user if theft shock the car or drive the car away. |
| 6 | Overspeed Alarm | When speed is over than the set speed, device will send message to user. |
| 7 | Shut Off Engine | User can cut engine via platform or sending message to device. Vehicle will be shut down and theft can’t drive car away.( For safety considering, it will not cut engine while speed is above 20km/h) |
| 8 | Built-in Antenna | Built-in high tech of GPS/GSM antenna for easy installation. |
Power Code Wiring:
The standard voltage is 9.5V-100VDC.
Please use the power line which provided by the manufacturer.
The red line is the positive. The black line is the negative.
The negative should earth alone or link iron during installing.
Do not connect it to other ground wire. And please make sure the device is powered on status.
(Power switch on down position)
Red Led light will flashing while device installed correctly, GSM blue led light and GPS Green led light will flashing around 1 minutes later after getting signal.
Control Engine Wiring:
1, This device supports12V relay, please make sure install correctly of the power code wiring, or it can’t cut engine.
2, For safety, the device will cut engine via speed is less than 20km per hour
3, Please use the device in a valid way, or you will be responsible for any invalid activities.
Application:
1. Fleet management
2. Motor and bike
3. Rental Car Company
4. Taxi Company
5. Insurance company
Parameters:
| Dimension | 67(L) x 33.8(W) x 11.5(H) mm |
| Weight | 31g |
| GPRS | Class12,TCP/IP |
| GPS Sensitivity | -159dBm |
| GSM Frequency | 850/900/1800/1900Mhz |
| Operation Voltage | 9-100VDC |
| Position Accuracy | 10m |
| GSM/GPS Antenna | Built-in Design |
| Data Transmit | TCP,SMS |
| Non-movement Detection | Movement Alert based on built-in 3D |
| Mileage Report | Track by time/distance interval power off |
LED:
| GPS LED | Blue |
| GSM LED | Green |
| Power LED | Red |
Steps of installation:
1. Open the back cover,insert a SIM card to SIM Card Slot.
2. Switch power button up(Power on).
3. Connect the power cable with the interface of device. Now theree LED lights will lighting. Make sure the
receiving side face up, without any metal object shelter. The LED lights will glashing after 1 to 5mins.
It shows working normally.
4. Close the back cover.
5. Please ask professional technical to connect wires and install to the vehicle. After correct installation.
the REd LED will falshing, 1 min. Later the Blue Led will falshing too. That shows installing completely.
SMS Commands:
| Add Administrator No.1 | #6666#AAD#1#Cell No# |
| Cut Engine | #6666#CF# |
| Restore Engine | #6666#OF# |
| Check Status | CS |
| Restart device | #6666#reset# |
Picture:
