SHENZHEN YITUOWULIAN SYSTEM CO.,LTD
SHENZHEN YITUOWULIAN SYSTEM CO.,LTD
Add to Cart
Black High Sensitive Auto Gps Tracking Device Built - in GPS And GSM Antenna
Main Functions:
| NO. | Function |
| 1 | Real time Track position |
| 2 | mobile phone track the routes |
| 3 | SMS Message command controls the engine on or off |
| 4 | Motorbike anti-theft alarm |
Feature Description:
| NO. | Feature | Descrption |
| 1 | GPS Positioning | Any time you can track the position via mobile phone or computer. and the device always send the currrent position data to server. |
| 2 | Playback Routes | the device send current GPS position data to server each 20seconds. then they will be in server for more than 2 months. user can check the routes via history track function. |
| 3 | Setting Function Via SMS | Setting function of device via SMS and check location via SMS. |
| 4 | Ignition Detection | Green line can detect the voltage value of vehicle iginition line. the status will be in the GPS data and stored in server. |
| 5 | Vibration Alarm | After setting,Device will send message and call user if theft shock the car or drive the car away. |
| 6 | Overspeed Alarm | When speed is over than the set speed, device will send message to user. |
| 7 | Shut Off Engine | When you want to stop the vehicle,you can send the SMS command then the device will control the engine off via relay. |
| 8 | Built-in Antenna | Built-in high tech of GPS/GSM antenna for easy installation. |
Application:
1. Fleet management
2. Motor and bike
3. Rental Car Company
4. Taxi Company
5. Insurance company
Parameters:
| Dimension | 67(L) x 33.8(W) x 11.5(H) mm |
| Gross Weight | 0.15kg |
| GPRS | Class12,TCP/IP |
| GPS Sensitivity | -160dBm |
| GSM Frequency | 850/900/1800/1900Mhz |
| Operation Voltage | DC9V To 100V |
| Position Accuracy | 10meters |
| GSM/GPS Antenna | Built-in |
| Data Transmit | TCP,SMS |
| Non-movement Detection | Movement Alert based on built-in 3D |
| Mileage Report | Track by time/distance interval power off |
LED:
| GPS LED | Blue flash stands for GSM signal is normal |
| GSM LED | Green flash stands for GPS signal is normal |
| Power LED | Red stands for power status. |
Steps of installation:
1. Prepare one 2G GSM SIM Card and open GPRS function.
2. Open the back cover,insert a SIM card to SIM Card Slot.
3. Turn on the battery switch and three LED will be on.
3. Connect the power cable with the interface of device. Now theree LED lights will lighting. Make sure the
receiving side face up, without any metal object shelter. The LED lights will glashing after 1 to 5mins.
It shows working normally.
4. Close the back cover.
5. Please ask professional technical to connect wires and install to the vehicle. After correct installation.
the REd LED will falshing, 1 min. Later the Blue Led will falshing too. That shows installing completely.
SMS Commands:
| Setting the IP of Server | #6666#IP#119.23.233.52#9891# |
| Checking the IP | #6666#IP?# |
| Getting Location | #6666#GL# |
| Opening voice monitoring function | #6666#OM# |
| Restart device | #6666#reset# |
Picture:
