Waterproof IP66 automotive gps tracker Car With External Power Cut Alarm

Waterproof IP66 automotive gps tracker Car With External Power Cut Alarm


Performance Parameters:



1. Product packaging accessories:
1.1 Power 4P line 1pc (standard accessory)
1.4 Electric relay 1pc (optional accessory)
1.5 User manual 1pc (standard accessory)
(Accessories products refer to the actual product)

2. Product features:

2.1 GSM four frequency(GSM850/900/1800/1900MHZ) system global general;
2.2 Built-in switching power supply, exceed wide voltage input range: 9-75 VDC;
2.3 GPS continuous GPS positioning, GPRS report regularly;
2.4 Support SMS message to check the location info;
2.5 Built-in vibration sensor, realization vehicle anti-theft intelligently;

Description:

1. It can be tracked by webpage GPS tracking platform/android & IOS phone APP/messages.
2. It’ll sleep automatically when it’s still and will be awakened by moving, therefore, it can save power a lot.
3. It supports geofencing set by the webpage GPS tracking platform/smart phone APP/messages, once it’s out of fence, a warning will be sent to the monitor phone number.
4. GPS Tracker For Motorcycle four frequency(GSM850/900/1800/1900MHZ) system global general;
5. Car GPS Tracker built-in switching power supply, exceed wide voltage input range: 9-80 VDC;
6. Car GPS Tracker GPS continuous GPS positioning, GPRS report regularly;
7. Car GPS Tracker Support SMS message to check the location info;
8. Built-in vibration sensor, realization vehicle anti-theft intelligently;
9. ACC the ignition signal detection,vehicle status prompted;
10. Built-in backup battery, realize the illegal cut the line alarm;

Detail Pictures:

• IP67 Waterproof design
• Built-in Li-ion battery

Weight : <67g


Applications :

• Motorcycles / E-bike real-time tracking , Anti-theft
• Vehicle rental / Fleet management etc

Gurantee:

1. All of our product is free to use the Tracking service server in 24 hours each day
2. All of our product there is a 2 year quanlity assurance.
3. Sample fee will not be returned.


Product Configuration:

1. Standard configuration

1 power cord 1pc
2 device 1 set
3 User manual 1pc

1. If the old car is to be removed the original sensor; New car installed directly.

2. Before installation, please check the attachment: flange, rubber pad, o-rings, whether is complete and screw
3. Will O type in the root of the sensor trap
4. Rubber pad and flange constructed and the fuel tank to good hole a flange,;and the screw good, should be tightened in turn symmetrical strength, to ensure that each direction stress even, avoid oil leak.
5. The sensors with a wrench into tighten can complete the installation of the sensor
6. Use a special tool to open sensor cover, according to the definition by good power and communications respectively line
7. Check line normal, can connect the sensor power supply, the sensor can work normally