SHENZHEN YITUOWULIAN SYSTEM CO.,LTD
SHENZHEN YITUOWULIAN SYSTEM CO.,LTD
Add to Cart
Vehicle Auto Speed Limiter with Relay for Ethiopia Mechanical Throttle Model Car
1 Speed Limiter GPS Product Specifications
Vehicle speed limiter CA100F is an intelligent terminal equipment which can realize precise speed limiting for vehicles. It is not only a speed limiter but also a GPS Tracker.Speed control precision is very high and the performance is reliable. It will not affect the big throttle start nor the power torque, stable and reliable. It only limits the maximum speed and the vehicle will not stall during speed limiting, and ensure the throttle pedal free movement in the right speed range.
| Dim. | 117*92*31 (mm) |
| Band | 850/900/1800/1900MHz |
| GPS chip | U-blox |
| Bluetooth Module | BT360I |
| Work Voltage | DC 9V－36V |
| Battery | Rechargeable 3.7V |
| Standby work current | < 40mA |
| Operation Temp. | -20°C to +70°C |
| Humidity | 5%--95% non-condensing |
| CPU | STM32F105RBT6 |
Vehicle Auto Speed Limiter with Relay for Ethiopia Mechanical Throttle Model Car
3.Speed Limiter Analysis of the content of tcp reply:
Vehicle Auto Speed Limiter with Relay for Ethiopia Mechanical Throttle Model Car
| 1 | FACTORY*123456 | Setting back to factory default |
| 2 | CHANGEPW*123456*138138 | New Password:138138 |
| 3 | SPEED*123456*080 | Set Speed OK: 80 |
| 4 | RESET*123456 | Cancel all alarm setting and re-power on |
| 5 | INTERVAL*123456*030 | Set Interval 30 s OK |
| 6 | IP*123456*S121.201.110.106,5300 | IP SET OK |
| 7 | NUMBER*123456*13612345678 | NEW ID: 13612345678 |
| 8 | TIMEZONE*123456*+08 | TIMEZONE: +08 |
| 9 | UPGRADE *123456*39.108.130.237,2332 | Upgrade Main Starting!!! |
| 10 | ACCON*123456*30 | Set Acc On Interval 30s OK |
| 11 | ACCOFF*123456*60 | Set Acc Off Interval 60s OK |
| 12 | TCP | Device Info |
| 13 | PULSE*123456*450 | Set PULSE parameter 450 OK |
| 14 | BTprint*123456 | Bluetooth printer start to print |
| 15 | print*123456*010 | change the Bluetooth print time is 10 minutes |
| 16 | Supplyoil*123456 | Supply fuel remotely |
| 17 | Cutoil*123456 | Cut off the fuel remotely |
| 18 | ALARMPHONE*123456 | Send alarm to admin phone number |
| 19 | openpulse*123456 | Open limp mode |
| 20 | Tcp | TP121.201.110.106 P7000DD000019171223244F0000S0014R0000O N30OFF60VJun 12 2020A:CMNET,p450,s80,c15, 0.360V, 0.720V,12.43V,a0,G00,-59 dbm |
(TP121.201.110.106P7000DD000019171223244F0000S0014R0000ON30OFF60VJ
un 12 2020A:CMNET,p450,s80,c15, 0.360V, 0.720V,12.43V,a0,G00,-59 dbm)
TP121.201.110.106 P7000: IP and port
DD000019171223244: device ID number
F0000S0014: upload data fail 0 times, successful 14 times
R0000: memory data is 0
ON30OFF60: interval of acc on is 30 seconds, and acc off is 60 seconds
VJun 12 2020: firmware of the devices is JUN 12 2020
A:CMNET: the APN is CMNET
p450: Pulse coefficient is 450 (If the pulse coefficient is larger, the speed will be
smaller)
s80: speed limiter max =80km/h
c15: For mechanical throttle, the time to disconnect the fuel line is 15 seconds
0.360V, 0.720V: Two throttle voltage values for electronic throttle vehicles
12.43V: vehicle voltage values
a0: a0 is acc off, a1 is acc on
G00: G00 means GPS not fixed, G10 means 10 satellites found
-59 dbm: GSM signal
Answer:Relay have 4 lines:87A and 30PIN are respectively connected to the two ends of the cut oil pump line;86 connects 12V or 24V power line in series;85PIN connects to the white line of the GPS speed limiter.Note: Control the speed of the speed limiter with above way, the delay of the speed limit will be relatively large. For example, if the speed limit is set to 40km/h, the car can also run up to 50km/h during acceleration. So, find the car pulse speed line and calibrate the pulse speed, the delay will be much smaller.For vehicles with mechanical throttle, if want to limit the speed without delay, need connect a solenoid valve and use a relay to control the solenoid valve to achieve the purpose of real-time speed limit.
Answer: Yes.the paltform is www.gps-go.com
Answer:Press and hold USB SWITCH for more than 3 seconds, all data will be downloaded to the U disk.
Besides, USB switch for other functions:USB switch pressed continuously 2 times, it is automatic calibration pulse coefficient
USB switch presses continuously 3 times, it is connected to the Bluetooth printer to print data.
Answer:Relay have 4 lines:
87A and 30PIN are respectively connected to the two ends of the cut oil pump line
86 connects 12V or 24V power line in series
85PIN connects to the white line of the GPS speed limiter.
5. Speed Limiter Solenoid valve Installation method
In principle, it is the same as installing a relay, but it is necessary to cut off the oil pipe of the oil pump, and then both ends of the oil pipe are connected to the two ends of the solenoid valve. In this way, when the vehicle with a mechanical throttle exceeds the speed limit value, it will disconnect the oil circuit When it is lower than the speed limit value, the oil circuit will be restored.
